The details of the Scarab knife are: Desert Ironwood sits on RWL-34 for both layers of steel. The knife is ‘one-sided’ and sits on an attached base of ebony. An ebony spacer separates the two layers of steel. The dagger is chisel edged (ground on one side to a zero-edge) with an 8” mirror hollow grind. The dagger blade is approximately 3 1/2” long and OAL is approximately 8”. Since the edge is 1/2 of the degrees of a normal knife-edge, it is very sharp. Screws were used to assemble the bottom layers and hidden pins with epoxy hold the Ironwood in place. This comes in a zippered case.